If you’re seeing a hard drive error on your PC, check out these troubleshooting tips.

Don’t let Windows errors hold you back.

  • Step 1: Download and install ASR Pro
  • Step 2: Open the program and click "Scan"
  • Step 3: Click "Repair" to start the repair process
  • Speed up your computer now with this software that will fix your PC errors.

    Bad constipation is an area of ​​memory advertising that is no longer reliable in terms of storing and retrieving data because the site has been physically damaged or damaged. Bad blocks are also called bad blocks. There are two types of bad blocks: or A hardware hard bad block is far from damaging the storage medium.

    Event ID 7 in the Windows event log with the description “DeviceHarddisk#DR#” has a full bad block” informs you that most of the hard drive your computer is built into cannot be printed . or read due to severe damage to the disc surface

    Event 7 (bad block warning) indicates that users should take the following actions to avoid losing their data:


    hard disk error bad block

    1. Important Many of the files you save from a documented corruptdisk th (disk) to a specific device (for example, to a USB flash drive).
    2. Check the disk surface for bad sectors and mark them with the CHKDSK command. (Step 2).
    3. Physical Diagnosis of hard disk damage (step 3).

    In many cases, all of the above tasks can be easily accomplished since most fans only have one hard drive tied to their system. However, if you use more than one hard drive in your system, you should first simply determine which one is damaged.

    This tutorial provides complete instructions on how to identify a damaged hard drive, diagnose it, and check the details of the “Hard drive has a bad block” event “devicehard (for example, drive #dr#”). .

    How To Fix Issue 7, “Disk Event ID Contains A Block Of New Bad Errors”.

    How do I fix a bad hard drive block?

    A way to fix the DeviceHarddisk0DR0 bad block error might be to perform a chkdsk scan. This built-in utility scans your entire hard drive for bad things and completely replaces all bad entries with a healthy sector.

    Step 1. Determine the logical drive letter of the damaged hard drive due to the occurrence of many other errors. *

    *Note. If you have installed only one hard drive in the system, skip the owner,Skip this step and go to step 2.First

    -step – use event “Event ID 7, drive crashed” to determine which logical drive letter is mapped to the problem drive. To complete this task:

    1. In the Event notes system, viewer indents are added after the word “Hard disk” in most of the 7 events.

    Warning messages

    for example. As you can see in the example screenshot below, the System Event Viewer warning shows a message > From (Windows System Logs), such as 7 on “Harddisk3” hardware.

    “Event 7, Disk Device, DeviceHarddisk3DR3, failed”

    6 block. Select the disk number (number) that the event refers to every 7 errors. *

    7. In the now right pane, look and note “HardDiskVolume”, a number, specifically “SymLink”, which is displayed below the column. *

    9. In the right pane: click once on the feed name “SymLink” to sort the results.

    ten. Now scroll down, you will find a line full containing the value “DeviceHarddiskVolume1” (in column) “symlink”.

    How bad blocks are handled?

    on natural hard drives, such as some hard drives with IDE controllers, bad blocks are dealt with manually. One strategy is to check the hard drive for bad components when formatting the hard drive. All bad blocks are identified as unusable, so the directory system does not assign them. You

    11.When you find a line, this in the Name column you will see the burnt letter of the damaged hard drive. *

    Step 2.Check and fix file system errors with CHKDSK.

    After telling the hard drive which drive the weak blocks are on, you should directly check them for bad sectors and mark these types with the chkdsk command. In addition, the chkdsk command checks the integrity of the logging system manually and fixes logically triggered system errors.

    2. In the Keep Control window, at the command prompt, type the following* command and press Enter:

  • chkdsk %drive letter% /f /r
  • *Note: For %DriveLetter%, enter the drive letter of the hard drive (for example, C:, E:, F:, etc.) for which you want to scan for errors. *

    * In this case, your current Chkdsk: command is G: /r /r

    3. After the CHKDSK command is completed, use these instructions to view the scan results and encoding successfully with chkdsk.

  • Related article: Diagnosing CHKDSK related file system fixes and errors.
  • Step 3. Check the damaged hard drive disk for physical problems.

    The last step that will help you resolve the “Event 7 “Hard drive gives bad block” error is to test and diagnose the problem hard drive for physical damage. So, you perform this task:

    1. Download and install the latest free version of Tune high resolution diagnostic software.*

    hard disk error bad block

    2.After installation, run Hd tune and select everything on the About tab.

    3. You select all the hard drives listed above one by one until you find the one that was assigned to the drive you found in the previous step. *

    * In this example, the most important hard drive (on the “G” side) is “ST3500620AS (500 GB)” (Seagate).

    4. If you find that the hard disk is normally damaged, select the tab where “health”, you can see the “health status” of the disk, hard drive and also measure the S.M.A.R.T. Report. Check the ‘Status’ column here to make sure all aspects are marked ‘OK’. If not, run a full surface scan (see below).

    5.Finally, select the Scan Error tabscan” and run diagnostics on a full disk surface scan. *

    *Important: The red square is smaller which means someone needs to replace the hard drive ASAP.

    How do I know if my hard drive has bad blocks?

    double click (My Computer) and usually right click on the hard drive.From the Properties dialog box’s context menu, select the Tools operator.Click Check Now in the Error Check Status field.

    Here it is! Let me know if this guide has made it easier for you to read your comments close to your experience. Like and share this guide to help others.

    If this is the first time you have found this article helpful, please support us by making a donation.

    Even 1 dollar can make a huge difference to us

    Can bad blocks be repaired?

    Although a bad sector can be repaired when the operating system detects an error, itShe recognizes and reassigns her, which in short means that she ignores her from the start. Bad software sectors are sometimes repaired by your system’s hard drive recovery programs or repaired by the disk format process.

    in our work to continue helping others, although we keep this site free:

    Don’t let Windows errors hold you back.

    Don't let your PC problems get you down! The ASR Pro repair tool can help you diagnose and fix common Windows issues quickly and easily. Plus, by using ASR Pro, you can also increase system performance, optimize memory, improve security and fine tune your PC for maximum reliability. So don't wait - download ASR Pro today!

  • Step 1: Download and install ASR Pro
  • Step 2: Open the program and click "Scan"
  • Step 3: Click "Repair" to start the repair process

  • Speed up your computer now with this software that will fix your PC errors.

    La Meilleure Façon De Réparer Une Erreur De Disque Dur
    La Mejor Manera De Corregir Un Error Del Disco Duro
    Det Bästa Sättet Att Fixa Ett Hårddiskfel
    Лучший способ исправить ошибку жесткого диска
    Najlepszy Sposób Na Naprawienie Błędu Dysku Twardego
    De Beste Manier Om Een ​​fout Op De Harde Schijf Te Herstellen
    하드 드라이브 오류를 수정하는 가장 좋은 방법
    Der Beste Weg, Um Einen Festplattenfehler Zu Beheben
    A Melhor Maneira De Corrigir Um Erro No Disco Rígido
    Il Modo Migliore Per Correggere Un Errore Del Disco Rigido